Канаты Puget Sound в РФ. Тел. 8-800-707-06-93

Nylon Double Braid is the preferred choice for applications requiring high strength with excellent shock absorbing properties. Nylon Double Braid has good resistance to abrasion, sunlight and chemicals. Due to its high elongation, nylon is almost always used in applications involving shock loading such as anchor lines and mooring lines. Nylon Double Braid comes standard with an overlay marine finish. 2 2-1/4 2-3/4 3 3-1/4 3-1/2 3-3/4 4 4-1/2 5 5-1/2 6 6-1/2 7 7-1/2 8 8-1/2 9 10 11 12 13 5/8 3/4 7/8 1 1-1/16 1-1/8 1-1/4 1-5/16 1-1/2 1-5/8 1-3/4 2 2-1/8 2-1/4 2-1/2 2-5/8 2-3/4 3 3-1/4 3-5/8 4 4-1/4 11.6 14.7 21.8 26.0 31.0 35.4 40.7 46.3 58.4 72.3 87.7 103.9 122.0 141.2 162.6 185.1 201.2 234.3 288.9 349.9 416.2 481.5 14,800 19,000 28,300 33,500 39,000 44,900 52,300 58,800 74,000 92,400 110,900 131,500 152,800 181,000 201,000 222,000 248,000 277,000 341,000 409,000 475,000 549,000 Specific gravity 1.14* Melting point 414° F (212° C)* Critical temp. 300° F (149° C)* Coefficient of friction 0.12 - 0.15* Elongation at break 30% - 35% Fiber water absorption 3% - 5% UV resistance good Wet abrasion excellent Dry abrasion excellent • High stretch • High strength • Excellent shock absorption • Soft hand • Torque free • Meets MIL-DTL-24050E 5 10 15 20 25 30 35 40 Load (% of average strength) 3 6 9 12 15 18 % E l o n g a t i o n El onga t ion (%) N Y L O N D O U B L E B R A I D NN REV 007 17 APRIL 2003 MinimumTensile Strength Pounds kN Inch MM Nominal Diameter Size Number (circ) Lbs/100ft Kg/100m Approximate Weight 16 18 22 24 26 28 30 32 36 40 44 48 52 56 60 64 68 72 80 88 96 104 17.2 21.9 32.4 38.7 46.1 52.7 60.6 68.9 86.9 107.6 130.5 154.6 181.6 210.1 242.0 275.5 299.4 348.7 430.0 520.7 619.4 716.6 Tensile Strengths are determined in accordance with Cordage Institute 1500, Test Methods for Fiber Rope. With extended imersion in water, all nylon ropes will lose up to 10% of their strength. Weights are calculated at linear density under standard preload (200d 2 ) plus 7%. See reverse side for application and safety information. 1/4 5/16 3/8 7/16 1/2 9/16 6 8 9 11 12 14 3/4 1 1-1/8 1-1/4 1-1/2 1-3/4 1.7 2.6 3.7 5.1 6.6 9 2.5 3.9 5.5 7.6 9.8 13.4 1,900 2,900 4,200 5,700 7,400 10,200 8.5 12.9 18.7 25.4 32.9 45.4 ABS AND DNV TYPE APPROVED SIZES 1012 SECOND STREET ANACORTES, WA 98221 USA TEL: 360-293-8488 FAX: 360-293-8480 www.psrope.com sales@psrope.com 65.8 84.5 125.9 149.0 173.5 199.7 232.6 261.6 329.2 411.0 493.3 584.9 679.7 805.1 894.1 987.5 1103.2 1232.2 1516.8 1819.3 2112.9 2442.1 * - value based on data supplied by the fiber manufacturer for new, dry fiber