Заказать YOKE: тел.8-800-707-06-93 (беспл. по РФ)

D B L A B L A B L B D L 903Y-03 1/8 0.44 0.14 0.50 0.40 0.02 903Y-05 3/16 0.56 0.20 0.70 0.52 0.04 903Y-06 1/4 0.63 0.30 1.06 0.58 0.08 903Y-08 5/16 0.88 0.36 1.13 0.77 0.16 903Y-10 3/8 0.88 0.42 1.48 0.77 0.15 903Y-11 7/16 1.13 0.48 1.63 1.03 0.30 903Y-13 1/2 1.31 0.55 1.89 1.16 0.50 903Y-14 9/16 1.44 0.61 2.02 1.29 0.70 903Y-16 5/8 1.56 0.67 2.42 1.42 1.00 903Y-19 3/4 1.69 0.79 2.73 1.55 1.31 903Y-22 7/8 2.00 0.94 3.27 1.80 2.20 903Y-25 1 2.25 1.06 3.67 2.05 3.10 903Y-28 1 1/8 2.56 1.19 4.05 2.30 4.50 903Y-32 1 1/4 2.81 1.33 4.58 2.56 6.51 A B L 9041-06 1/4 3/4 9/16 7/8 0.53 0.03 9041-08 5/16 1 1/8 25/32 1 19/32 0.76 0.18 9041-10 3/8 1 1/8 13/16 1 23/32 0.76 0.14 9041-11 7/16 1 7/16 1 1/32 2 1/32 1.01 0.35 9041-13 1/2 1 7/16 1 2 1.01 0.31 9041-14 9/16 1 3/4 1 3/16 2 1/4 1.27 0.60 9041-16 5/8 1 13/16 1 1/4 2 3/8 1.27 0.60 9041-19 3/4 2 1/8 1 7/16 3 1/16 1.53 1.00 9041-22 7/8 2 1/2 3 3/8 3 1/4 1.76 1.50 9041-25 1 2 7/8 3 7/8 3 3/4 2.04 2.00 A B L 9042-13 1/2 1 3/8 15/16 1 1/16 1.01 0.20 9042-14 9/16 1 11/16 1 3/16 1 1/4 1.27 0.31 9042-16 5/8 1 13/16 1 13/16 1 1/16 1.27 0.30 9042-19 3/4 2 1/8 1 3/8 1 3/16 1.53 0.50 9042-22 7/8 2 1/2 1 4/3 1 3/8 1.76 0.70 9042-25 1 2 3/4 1 13/16 1 9/16 2.04 1.00 9042-28 1 1/8 3 3/16 2 1 7/8 2.26 1.50 9042-32 1 1/4 3 3/8 2 3/8 2 1/8 2.51 2.00 9042-35 1 3/8 3 9/16 2 5/16 2 1/8 2.51 2.00 9042-38 1 1/2 3 7/8 2 1/2 2 1/4 2.70 2.00 9042-42 1 5/8 4 5/16 2 13/16 2 3/8 3.08 3.00 9042-45 1 3/4 4 7/16 2 13/16 2 1/2 3.08 3.30 9042-50 2 5 3 3/16 2 7/8 3.52 4.30 9042-57 2 1/4 5 11/16 3 3/4 3 1/8 4.02 6.51 9042-64 2 1/2 6 3/8 4 3 1/8 4.39 7.51 NEVER EXCEED PUBLISHED WORKING LOAD LIMIT WARNING Copyright © 2012 YOKE Industrial Corp. All Rights Reserved. Steel Swage Buttons. Stainless Steel One-Piece Sleeves. Stainless Steel Two-Piece Sleeves. Recommended to be used with 6x19, 6x25, 6x29, 6x37 IPS XIP (EIP), FC or IWRC wire rope. If using with any other type of construction or grade of wire rope, it is recommended to make the breaking load test of the swaged termination to prove the adequacy of the assembly to be manufactured. Recommended to be used with 6x19, 6x25, 6x29, 6x37 IPS XIP (EIP), FC or IWRC wire rope. If using with any other type of construction or grade of wire rope, it is recommended to make the breaking load test of the swaged termination to prove the adequacy of the assembly to be manufactured. Just one step will finish the swaging, turning the sleeves(ferrules) 90° and swaging again is not recommended. Recommended to be used with 6x19, 6x25, 6x29, 6x37 IPS XIP (EIP), FC or IWRC wire rope. If using with any other type of construction or grade of wire rope, it is recommended to make the breaking load test of the swaged termination to prove the adequacy of the assembly to be manufactured. Just one step will finish the swaging, turning the sleeves(ferrules) 90° and swaging again is not recommended. Item No. For Rope Size Before Swage Dimensions (inch) Max. After Swage Dim. N.W. inch inch Lbs Item No. For Rope Size Before Swage Dimensions (inch) Max. After Swage Dim. N.W. inch inch Lbs Item No. For Rope Size Before Swage Dimensions (inch) Max. After Swage Dim. N.W. inch inch Lbs 17