Для заказов: тел.8-800-707-06-93 (беспл. по РФ)

54 Grade 10 products Applications : Grade 10 offers a lifting capacity which is 25 % greater than the grade 8, for a comparable chain size. For many applications a smaller chain size can be chosen. This results in lighter, easier to handle chain slings. Range : Van Beest offers a wide range of grade 10 items in order to assemble a complete sling from the top master link to the hooks. The range extends from 6 mm up to 16 mm. (7/32” up to 5/8”). Design : Grade 10 items supplied by Van Beest are all manufactured from alloy steel. All grade 10 items have an equivalent in a grade 8 quality. These components are generally stamped with following markings: manufacturer’s identification symbol EXCEL traceability code e.g. AB, pertaining to a particular batch CE conformity code CE, Conformité Européen item code e.g. UMP chain diameter in mm and/or inch e.g. 13 and/or 1/2” origin FRANCE Finish : The grade 10 hooks are powder coated in blue. Certification : Upon request, all the grade 10 items can be supplied with a works certificate and/or EC Declaration of conformity. Some items can also be supplied with a manufacturer test certificate and/or a 3.1 material certificate. We refer to the detailed product information on the next pages. Instructions for use : In general all grade 10 components should be inspected before use to ensure that: • all markings are legible • all items are free from nicks, gouges, cracks and corrosion • items with the correct Working Load Limit have been selected with respect to the sling design i.e. the load to be lifted, the number of legs in the sling, the top angle etc. For further details, we refer to EN818, norm for chain slings • items may not be heat treated as this may affect their Working Load Limit • never modify, repair or reshape an item by machining, welding, heating or bending as this may affect the Working Load Limit • master links and the other items of the sling are all identifiable as being of the same steel grade • items should be used for straight in line loading only, this in order to avoid bending • items are not distorted or unduly worn It is required that the products are regularly inspected and that the inspection should take place minimally in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading, etc. with a consequence of deformation and alteration of the material structure. Inspection by a competent person should take place at least every six months and even more frequently when the components are used in severe operating conditions. Working Load Limit table for Grade 10 Chain Slings Chain Ø 1 leg sling 2 leg sling 3 or 4 leg sling Endless sling 0°<ß ≤ 45° 45°<ß ≤ 60° 0°<ß ≤ 45° 45°<ß ≤ 60° Safety factor 1.4 Safety factor 1.0 Safety factor 2.1 Safety factor 1.5 Safety factor 1.6 inch mm t t t t t t 7/32  6  1.40  1.95  1.40  2.95  2.10  2.24 5/16  8  2.50  3.55  2.50  5.30  3.75  4.00 3/8 10  4.00  5.65  4.00  8.50  6.00  6.40 1/2 13  6.70  9.45  6.70 14.00 10.00 10.70 5/8 16 10.00 14.10 10.00 21.20 15.00 16.00 3/4 20 16.00 22.40 16.00 33.60 24.00 25.60 7/8 22 19.00 26.50 19.00 40.00 28.00 30.40

RkJQdWJsaXNoZXIy NjQzMTQ5