Для заказов: тел.8-800-707-06-93 (беспл. по РФ)

42 Swivels Applications: Swivels are used to prevent wire rope or chain from transferring their normal twisting motion to the item being lifted. EXCEL® swivels are designed to rotate under load. Range: Van Beest offers two types of swivels. Both are equipped with needle bearings. Design: The Excel® swivels are drop forged. The swivels do not need grease during use. These components are generally stamped with following markings: manufacturer’s identification symbol EXCEL traceability code e.g. AB, pertaining to a particular batch steel grade 8 CE conformity code CE, Conformité Européen item code e.g. ECA chain diameter in mm and/or inch e.g. 13 and/or 1/2” Finish: The grade 8 swivels are powder coated in red. Certification: Upon request, all swivels can be supplied with a works certificate, a 3.1 material certificate and/or EC Declaration of conformity. Instructions for use: Swivels should be inspected before use to ensure that: • all markings are legible • swivels are free from nicks, gouges, cracks and corrosion • a swivel with the correct Working Load Limit has been selected with respect to the sling design i.e. the load to be lifted, the number of legs in the sling, the top angle etc. For further details, we refer to EN818, norm for chain slings • swivels may not be heat treated as this may affect their Working Load Limit • never modify, repair or reshape a swivel by machining, welding, heating or bending as this may affect the Working Load Limit • swivels and the other components are all identifiable as being of the same steel grade • swivels are not distorted or unduly worn • swivels must be used for straight or in line lifting only It is required that the products are regularly inspected and that the inspection should take place minimally in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading, etc. with a consequence of deformation and alteration of the material structure. Inspection by a competent person should take place at least every six months and even more frequently when the swivels are used in severe operating conditions. Assembly : The clevis ends can be directly connected to the corresponding lifting chain. For eye ends, a connector like a connecting link can be used.