Для заказов: тел.8-800-707-06-93 (беспл. по РФ)

30 Lifting eyes Applications: Lifting eyes are screwed or welded on a load or a machine to be used as lifting points. Range: Van Beest offers a wide range of lifting points in alloy steel: fixed, articulated, pivoting and/or rotating. • Fixed lifting point: • Eye nut, type EL - a metric version • Eye bolt, type AL - a metric version with standard and shorter lengths (according to DIN580 lengths) - a UNC version in one standard length • Pivoting and rotating lifting eye bolts: • Pivoting (180°) eye bolt, type OL - a metric version • Pivoting (180°) and rotating (360°) eye bolt, type ADA - a metric version in 3 different lengths - a UNC version in one standard length • Welded transport ring, type PAS - from 1.2 t up to 15 t, to be welded on the load Design: The lifting eyes are manufactured grade 8 alloy steel. Only the forged welding block of the PAS is made of weld quality steel. Compared to the DIN 580 and 582 carbon steel lifting eyes, the alloy steel lifting eyes offer a higher Working Load value for an equivalent size. For example, DIN 580 M20 in carbon steel has a Working Load Limit of 1.2 t and the alloy steel lifting eye AL M20 has a Working Load Limit of 2.5 t. The ADA articulated lifting eyes can be loaded in all directions, providing full safety. These components are generally stamped with following markings: manufacturer’s identification symbol EXCEL traceability code e.g. AB, pertaining to a particular batch steel grade 8 (only on AL, EL and ADA) CE conformity code CE, Conformité Européen item code EL, AL, ADA or OL metric value e.g. M16 Working Load Limit e.g. 1.5 t origin FRANCE Finish: The grade 8 lifting eyes are powder coated in red. All the lifting eyes are supplied with a protective cover over the thread. Do not remove until use. Certification: Upon request, all lifting eyes can be supplied with a works certificate and/or EC Declaration of conformity. Some items can also be supplied with a 3.1 material certificate. We refer to the detailed product information on the next pages. Instructions for use: Lifting eyes should be inspected before use to ensure that : • all markings are legible • lifting points are free from nicks, gouges, cracks and corrosion • lifting point with the correct Working Load Limit has been selected with respect to the load to be lifted, the angle, the thread and the shank length • lifting eyes should never be side-, tip- or back-loaded • always make sure that the lifting eye is supporting the load correctly • lifting eyes may not be heat treated as this may affect their Working Load Limit • never modify, repair or reshape a lifting eye by machining, welding, heating or bending as this may affect the Working Load Limit • lifting eyes and the other components are all identifiable as being of the same steel grade • lifting eyes are not distorted or unduly worn • lifting point should be seated well down in a hook • lifting points should be well fixed in the load (same thread, well positioned)