Для заказов Green Pin: тел.8-800-707-06-93 (беспл. по РФ)

94 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Links Connecting links are used for chain slings. Master links and master link assemblies are used for 1, 2, 3 and 4-leg slings. Applications Range Master links up to 37 t and master link assemblies up to 50 t are supplied with a flat part for easy connection of the master link in the sling; the connecting links are supplied unassembled but are designed for easy and quick assembly. All master links and connecting links are suitable for lifting purposes, with a safety factor of four times the working load limit. Each master link and connecting link carries the manufacturer’s symbol, the batch code, the steel grade and the CE conformity code marked in the body. Design All connecting links and master links are painted yellow or red. Finish Test certificates can be supplied upon request. Certification Connecting links, master links and master link assemblies should be inspected before use to ensure that: • the link and the assemblies are both identifiable as being of the same steel grade; • all markings are legible; • links, assemblies and connecting links are free from nicks, gouges and cracks; • a link with the correct Working Load Limit has been selected with respect to the sling design i.e. load to be lifted, number of legs in the sling top angle etc. For further details we refer to EN 818, standard for Chain Slings; • links, assemblies and connecting links may not be heat treated as this may affect their Working Load Limit; • during the assembly of connecting links, we promote the use of a lubricant on the pin. It is required that the products are regularly inspected and that the inspection should take place minimally in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the links are used in severe operating conditions. Instructions for use Van Beest supplies a wide range of Green Pin ® connecting links for chain with diameter 6-32 mm, as well as a wide range of master links and master link assemblies. Van Beest can also offer other types of links in grade 8, grade 10 and stainless steel. Please see our Excel ® catalogue for more information.