Для заказов Green Pin: тел.8-800-707-06-93 (беспл. по РФ)

72 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Sockets 3) Swage sockets - swage sockets are recommended for use on 6 x 19 or 6 x 37 IWRC regular lay ropes - mark the rope to indicate the proper length of rope to be inserted into the socket (figure 5) - insert the rope into the socket and swage the socket with the specified dies (figure 5) - all slings terminated with swage sockets must be proof loaded - always swage under supervision of a specialist from a certified sling shop It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the sockets are used in severe operating conditions. Step 1. Mark rope to indicate proper amount to insert into socket. Step 2. Insert rope into socket. Step 3. Swage the socket. Figure 5 Figure 4 Open swage socket Closed swage socket