Продукция для выживания и безопасности на море SURVITEC

FIRE EQUIPMENT FIRE EQUIPMENT 174 175 www.survitecgroup.com // email: info@survitecgroup.com // call: 0330 333 1999 www.survitecgroup.com // email: info@survitecgroup.com // call: 0330 333 1999 An Emergency Escape Breathing Device (EEBD) is an important life-saving appliance which is used for escaping an area with hazardous conditions such as fire, smoke, poisonous gases etc. All ocean-going vessels must carry at least two EEBD units in the crew accommodation and similar units in the machinery spaces to comply with current legislation as per SOLAS Chapter II-2 and MSC-99(73). There must also be spare escape sets on board and a number of sets available for training. With Passenger Ships, regulations state there must be at least two EEBDs carried in each main vertical zone with at least four per zone. Most EEBDs provide 15 minutes to escape out from danger. However, an EEBD should never be used for fire-fighting purpose or life-saving purposes. Survitec EEBD EEBD TH15B MED approved EEBD Box Spiroscape EEBD EEBD 200 bar, Full CE approved EEBD 200 bar, Empty CE approved Scott Safety EEBD ELSA 15-B - Full MED approved ELSA 15-B - Empty MED approved Spiroescape EEBD Survitec EEBD ELSA 15-B (ELSA 10-B also available) Emergency Escape Breathing Device (EEBD) Breathing Apparatus OCENCO EEBD Ocenco Model M20.2 EEBD • Closed circuit compressed O 2 system • Used for emergency escape from any enclosed confined spaces, providing up to 32 minutes of protection • Quick and easy to use and can be fitted when the room has already filled with smoke • No annual service required, 15-year service life PARAT Smoke Hood PARAT Escape hoods are optimised for operation and comfort, a robust housing and tested filters guarantee protection from toxic fire-related gases, vapours and particles for at least 15 minutes. Fire Extinguisher Cabinets / Fire Hose Cabinets A range of GRP cabinets and Toughstore Cabinets are available for Fire and BA Equipment. JB82 Fire Extinguisher Cabinet Made from 3-4mm nominal thickness GRP with stainless steel and nylon jaw action door catch, recessed nylon graphite rotary door handle and nylon 6 ‘T’ hinges. Suitable for storage of 1 x 9kg to 12kg fire extinguisher. Made from 3–4mm nominal thickness GRP with steel and nylon jaw action door catch. Storage of 1 x 12kg/12L fire extinguisher or 1 x 5kg CO 2 extinguisher (max height 750mm) SOS101 Fire Extinguisher Cabinet ABS body clear polycarbonate door, black polycarbonate door catch and hinges and rubber seal. All fittings are polycarbonate. Suitable for storage of 1 x 9kg or 9L fire extinguisher. Lloyd's Register Type Test Approved. JB02, JB28, JB83, JB59, JB65 available in this range. JB02H Fire Hose/ Hydrant Equipment Cabinet Made from 3-4mm nominal thickness GRP with stainless steel and nylon jaw action door catch, recessed nylon rod door handle and stainless steel T-hinges. Suitable for storage of 2 x lengths 18 metre fire hose and branchpipe (fitted with 1 x stainless steel hose pin). SOS12 Fire Hose Cabinet A rotationally moulded polyethylene cabinet in red with EPDM O section seal. Suitable for storage of 1 x 20 metre or 1 x 23 metre fire hose* and nozzle. * Please note not all 23 metre hoses will fit in this cabinet. Please check diameter of 23 metre hose will go through the door aperture. JB06, JB09, JB05H, JB10H, JB08H, JB64, RS100 and SOS6 available in this range. Dimensions • Closed circuit compressed O 2 system • Height x width x depth: 970mm x 470mm x 346mm • Aperture: H763mm x W277mm • Internal depth: 266mm • Weight: 10 kg JB01 Fire Extinguisher Cabinet