Оборудование для морских перевозок SEC Bremen

Necessary data for quotation Ship`s Equipment Centre Bremen GmbH May 2011 © Technical alterations reserved 1.13 - Length between perpendiculars ....................... Lpp - Moulded breadth .............................................. B - Depth ................................................................ D - Service Speed .................................................. v - Draught ............................................................ d - Height of tank top ............................................ h1 - Top of H/C above baseline ............................... h2 - Class of vessel ................................................. - OSHA compliance required................................ yes no Additional data for calculations according LRoS (NK or KR): Standard angle of roll (30°) or reduced angle of roll Standard GM value (2.5% and 7.5% of B) or as specified: Breakwater existing: yes no Additional data for calculation according GL: Standard acceleration or reduced acceleration or individual acceleration Additional data for calculation according DNV: Standard GM value (7 % of B) or as specified: Bilge keel existing: yes no Block coefficient to be specified: Additional data for calculation according BV: Standard GM value (7 % of B) or as specified: Standard value for roll axis above baseline (35 % of B) or as specified: Block coefficient at design draft to be specified: Additional data for calculation according ABS: GM value to be evaluated over the expected operation range: Bilge keel existing: yes no Container data: Required stackloads on deck for 20’ 40’ others: Required stackloads in hold for 20’ 40’ others: Transversal distance between containers on deck 25 38 80 mm or others: Transversal distance between containers in holds 25 38 80 mm or others: Longitudinal arrangement of 20’ containers with 76 mm ISO-gap or with lashing way in between (breadth of lashing way to be specified): Longitudinal container arrangement per each bay to be done symmetrically or asymmetrically Container Securing equipment: Type of foundations and lashing points on deck: ISO-foundations (H = 110 mm) in combination with lashing plates or dovetail foundations in combination with D-rings or other solution: Type of foundations in hold: Cellguides with welding cones at bottom in combination with guide fittings at ISO-gap or flush type twistlock pockets or welding plates (t = 30 mm) with ISO-holes For a precise quotation and calculation of weight distribution we do need certain information from you. Additionally to below listed data please provide a general arrangement (GA) plan or container arrangement plan in suitable size.