Racor: Морские фильтрационные системы и решения

34 Part No. Description Tread Size RK 11233 Vacuum Gauge, Silicone Dampened, 2" dial, 0-30 inHg. (0-15 PSI) 1/4" NPT Back Mount With Bracket 1606B Vacuum Gauge Kit. Gauge (RK 11233), one 7232-4, And One 7234-4 Fitting 1/4" NPT Back Mount With Bracket 7232-4 Adapter Fitting 1/8"MNPT x #4 (1/4") Hose 7234-4 Adapter Fitting 1/4" Swivel x #4 (1/4") Hose 0102-4-2 Adapter Fitting 1/4" NPTM x 1/8" NPTF RK11-1676E Vacuum Gauge With 2" Dial, Rotating Bezel, And Red Tell-Tale Pointer. O-30 inHg. (0-15 PSI) 1/4” NPT Bottom Mount RK11-1969 T-Handle Vacuum Gauge (for 500FG Turbine series fuel filter/water separators) 1/4" NPT x 3/4" Fitting Threads RK 11-1669 T-handle Vacuum Gauge (for 900 and 1000 Turbine series fuel filter/water separators) 1/4" NPT x 1" Fitting Threads RK 19492 UL-Listed Brass Drain Valve 1/4" NPTF Filtration Accessories Enhance Your Fuel Systems Performance and Ease of Service Vacuum/Compound Gauge Kits Vacuum and Compound (vacuum/pressure) gauges and related hardware are available to monitor filter condition. As the filter slowly becomes clogged with contaminants the restriction (resistance to flow) increases. The fuel pump still tries to draw fuel (suction) but because of this restriction less fuel is delivered to the engine and instead more air is pulled from it (fuel de-gassing). These results can cause the engine to lose power and eventually stall. By installing a vacuum gauge in your fuel system (on the outlet side of the Racor filter) visual monitoring of filter condition is possible at a glance. Note the position of the dial, or apply the ‘red line’ decal provided with most kits. This will assist in easy monitoring as filter efficiency begins to decrease when a filter change is necessary. Note: Intervals of filter changeout may vary depending on fuel cleanliness. Always keep a spare Racor filter on hand. Because it performs so well, it is not uncommon for the engine air filter to appear as if it has reached its capacity. The only way to know when the engine air filter has reached it's capacity is to measure the restriction at service. An effective way to verify restriction is with a filter restriction monitor. A restriction monitor will provide a quick and accurate assessment of the air filter’s condition and remaining service life. A Unit standard with a 1/8"-27 NPT straight fitting. B Unit standard with a 90˚ coupling and 10' hose. Standard Filter Monitor Part Numbers Part Number Range (In. water vac.) Description 400033015 A 8-15 inHg (27-51 kPa) Direct Mount 400033020 A 8-20 inHg (27-68 kPa) Direct Mount 400033025 A 8-25 inHg (27-85 kPa) Direct Mount 014440001 A 8-25 inHg (27-85 kPa) Direct Mount w/ 90˚ Fitting 072604000 B 4-25 inHg (14-85 kPa) Remote Mount 076248001 A 8-25 inHg (27-85 kPa) Dash Mount When is My Engine Air Filter “Used Up?” RK11-1676E Vacuum Gauge