Racor: Морские фильтрационные системы и решения

25 Note: For additional information, request brochure 7537 or 7648. RVFS Series Replacement Filter Options RVFS-1** Micron Description HOCP-15801 1 Coalescer HSP-15401 1 Separator HOCP-15805 5 Coalescer HSP-15405 5 Separator HOCP-15810 10 Coalescer HSP-15410 10 Separator HOCP-15825 25 Coalescer HSP-15425 25 Separator Note: All vessels come equipped with Viton ® o-rings and are compatible with biodiesel mixtures. ** For RVFS-1, 2, and 3, customer must order one OCP and one SP filter. A fuel filter/water separator consists of one coalescer and one separator filter. RVFS-3** Micron Description HOCP-44801 1 Coalescer HSP-44401 1 Separator HOCP-44805 5 Coalescer HSP-44405 5 Separator HOCP-44810 10 Coalescer HSP-44410 10 Separator HOCP-44825 25 Coalescer HSP-44425 25 Separator RVFS-2** Micron Description HOCP-30801 1 Coalescer HSP-30401 1 Separator HOCP-30805 5 Coalescer HSP-30405 5 Separator HOCP-30810 10 Coalescer HSP-30410 10 Separator HOCP-30825 25 Coalescer HSP-30425 25 Separator Specifications RVFS-1 RVFS-2 RVFS-3 Europe Options Inlet and Outlet Ports 2.0 in. NPT 2.0 in. NPT 2.0 in. NPT The RVFS is available with PED / CE approval and is manufactured in Europe. Maximum Flow Rate (diesel) 25 GPM (94 LPM) 50 GPM (189 LPM) 75 GPM (283 LPM) Vent and Relief Ports 3/4 in. NPT 3/4 in. NPT 3/4 in. NPT Water Level Gauge Ports 1/2 in. NPT 1/2 in. NPT 1/2 in. NPT Differential Gauge Ports 1/8 in. NPT 1/8 in. NPT 1/8 in. NPT This part numbering uses the suffix below, the technical information is as per the table to the left. Pressure and Temperature 250 PSI @ 250 o F (17 bar @ 121 o C) ASME Code Stamped Yes Yes Yes Clean Pressure Drop 2 PSID (0.14 bar) 2 PSID (0.14 bar) 2 PSID (0.14 bar) Pressure Drop/Filter Change‑out 15 PSID (1.0 bar) 15 PSID (1.0 bar) 15 PSID (1.0 bar) AO Height 35.3 in. (89.7 cm) 49.8 in. (126.5 cm) 63.8 in. (162.1 cm) AO = All Options Width 13.5 in. (34.3 cm) 13.5 in. (34.3 cm) 13.5 in. (34.3 cm) MO Depth 13.2 in. (33.5 cm) 13.2 in. (33.5 cm) 13.2 in. (33.5 cm) MO = Minimal Options Dry Weight 100 lbs. (45 kgs) 115 lbs. (52 kgs) 130 lbs. (59 kgs) SO Overhead Service Clearance 16.0 in. (40.6 cm) 32.0 in. (81.3 cm) 47.0 in. (119.4 cm) SO = Selected Options Applications for Racor RVFS Series filter vessels include removing liquid and solid contaminants from diesel fuel, gasoline, kerosene, aviation gas, jet fuel, and other lubricating or hydraulic oils. RVFS vessels utilize proven filter design technology and can be used as a coalescer, separator, water absorber, or clay treater by changing internal components, flow direction, or by selecting optional filter cartridges when ordering. The vessels are fabricated from carbon steel with an exterior primer coating and the interior is epoxy coated to meet MIL-C-4556E. Filter choices include a coalescer, separator, pre-filter, and water absorber or clay treater. Completely dressed factory filter vessels can be specified with differential pressure gauges, water sight glasses, air eliminators, and manual or automatic drains. Wall mount units can be special ordered. Pressure Rating: 250 PSI (17.2 bar) ASME Code Section VIII or 148PSI (10 bar) CE marked to PED. We manufacture CE marked vessels in Europe - specifications are the same as the RVFS vessels manufactured at Racor USA (see table below.)

RkJQdWJsaXNoZXIy NjQzMTQ5