Racor: Морские фильтрационные системы и решения
18 Box 1 Box 2 Box 3 Box 4 Box 5 Heater H = 12 vdc 150 watt heater 5 Series P3 = 30 GPH P4 = 40 GPH P5 = 50 GPH Micron 2 = 2 Micron 10 = 10 Micron 30 = 30 Micron 2 Ports N = 3/8” NPT port 3 P4 10 N H Pump 2 = 12 vdc pump 2 4 1 The P Series Diesel Fuel Conditioning Module (for vacuum side applications only) was developed for application in any diesel engine fuel injection system. P Series assemblies are available in three sizes and all feature 3/8" NPT fuel ports. This innovative and modular fuel filter/ water separator incorporates low-pressure fuel system components into a single package. It supplies clean, dry fuel to the fuel system and serves as a repriming system. Durable, 12 vdc roller-cell electric fuel pump offers the benefit of an electric, on-demand, priming pump. A fuel filter/water separator and primer pump in one unit. High-performance Aquabloc ® cartridge-style filter media is environmentally friendly and incinerable. Important Note: ABYC standards allow for installation outside of the engine room only. Fuel Conditioning Module Ordering and Specification Specifications P3 P4 P5 Maximum Flow Rate 114 LPH (30 GPH) 151 LPH (40 GPH) 189 LPH (50 GPH) Clean Pressure Drop 0.4 PSI (0.03 bar) 0.5 PSI (0.03 bar) 0.8 PSI (0.06 bar) Max. Pump Output (at 14.4 volts) 40 GPH (151 LPH) 40 GPH (151 LPH) 40 GPH (151 LPH) Standard Fuel Port Size (SAE J476) 3/8”-18 NPT 3/8”-18 NPT 3/8”-18 NPT Total Number of Ports Available Fuel Inlets Fuel Outlets 2 1 1 2 1 1 2 1 1 Replacement Filter 2 micron 10 micron 30 micron R58060-02 R58060-10 R58060-30 R58095-2 R58095-10 R58095-30 R58039-2 R58039-10 R58039-30 Minimum Service Clearance 6.4 cm (2.5 in.) 6.4 cm (2.5 in.) 6.4 cm (2.5 in.) Height 19.6 cm (7.7 in.) 22.9 cm (9.0 in.) 29.2 cm (11.5 in.) Depth 13.2 cm (5.2 in.) 13.2 cm (5.2 in.) 13.2 cm (5.2 in.) Width 12.2 cm (4.8 in.) 12.2 cm (4.8 in.) 12.2 cm (4.8 in.) Weight (dry - approx.) 3.4 lbs (1.5 kg) 3.8 lbs (1.7 kg) 4.2 lbs (1.9 kg) Maximum Pump Outlet Pressure 10 PSI (0.7 bar) 10 PSI (0.7 bar) 10 PSI (0.7 bar) Features Water Sensor Heater 1 Pressure Regulator (10 PSI) Standard Standard Standard Standard Standard Standard Standard Standard Standard Ambient Temp Range -40° to +255°F (-40° to +124°C) Maximum Fuel Temperature 190°F (88°C) Vacuum installations are recommended. 1 Not for use with gasoline applications.
RkJQdWJsaXNoZXIy NjQzMTQ5