Racor: Морские фильтрационные системы и решения

12 RFF15C RFF1C RFF8C RFF3C Caution for Users: Petroleum products flowing over a plastic surface generate static electricity. Caution should be taken to ensure that the RFF is grounded to reduce static electricity buildup and reduce the chance of explosions or fire. Electrically bond the funnel by using a wire with a metal clip on each end and clamp one to the upper rim of the funnel and the other to the fueling source. For example, the metal gas can or nozzle from the pump. Fuel Filter Funnel Racor Filter Funnel (RFF) is a heavy-duty, fast-flow, filter-in-a- funnel that separates damaging free water and contaminants from gasoline, diesel, heating oil, and kerosene. The RFF family of products is capable of removing free water and solids down to 0.005 inches and allows you to visually inspect the integrity of your fuel supply as you refuel. The RFF family is manufactured using industrial‑grade black electro‑conductive polypropylene. Carbon powder is injected into the plastic so that the RFF will conduct static electricity. The grounding capability of the RFF is an important safety feature. Always use proper fuel handling procedures and follow local, state, and federal regulations. Filter Funnels Fuel Polishing Module Daily buildup of condensation in a diesel fuel system can lead to fuel contamination through bacteria growth. Parker’s new FPM installation kits combat the daily accumulation of water in the fuel system, preventing corrosion and other problems. Regular use of a Racor Fuel Polishing Module (FPM) maximizes the effectiveness of a Racor fuel filter/water separator while keeping power consumption to a minimum. Choose From Two Kits FPM-051 Kit: Includes a FPM‑050 Fuel Polishing Module, a Racor 503MA Turbine Series fuel filter/water separator, a USCG approved fuel hose, and fittings. OR FPM-052-A Kit: Includes a FPM‑050 Fuel Polishing Module, a Racor 503MA fuel filter/water separator, USCG approved fuel hose, fittings, and a stylish black anodized FPM timer that enables you to program the fuel polishing system to run while unattended (#FPM‑PTC-12-A). Specifications FPM-050 Filtration Rate 50 gal/day (189 L/day) Power Requirements < 2 W (< 3 A-hrs/day) Internal Pressure Drop < 0.5 PSI (< 0.03 bar) Voltage Requirements 10-16 VDC, 12 VDC nominal Approx Dimensions (Body) (Body with Bracket) 3.87” L x 2.47” W x 2.14” D 3.87” L x 4.48” W x 2.14” D Inlet/Outlet Ports Recirculation Port 3/8” NPTF 1/4” NPTF Weight < 2 lbs ( < 0.9 kg) Acceptable Fuels Diesel, Biodiesel, Kerosene Note: Pump and FPM timer can be purchased separately. FPM-PTC-12-A FPM-050 503MA