Для заказов: тел.8-800-707-06-93 (беспл. по РФ)

Special lubricants For a perfect conservation of wire ropes in harsh environments, it is recommended to protect the rope from corrosion by providing the rope with a special sea water resistant lubricant. Wire rope lubricants are applied to smoothen rope bending and axial torsion as well. Contact between rope and sheave or drum is enhanced by rope lubricants too. ALUMAR ® aluminised ropes The aluminizing of steel wire and steel wire ropes is made by KISWIRE under the brand name ALUMAR ® . We apply this technology for about 10 years now, it started in 1999. Initially, the ALUMAR technology was developed for products applied in the aviation and car industry – the core demand was to extend the life time of the wires by sustaining the steel wire quality! Apart from many different kinds of improvement we could establish in this respect, it was obvious that an important improvement was to be made by protecting the wires from corrosion as long as possible. The ALUMAR zinc/aluminium coating was developed as an alternative for the regular galvanizing of wire. Many tests have been done in the meantime, showing that the ALUMAR wires stay corrosion free 3,8 times longer than galvanized products. Third party Salt Spray Tests are available. The offshore industry, both oil and gas as well as fishing, could benefit from ALUMAR ropes substantially, as sea water is a corrosive environment. BOOM HOIST ROPES 6x36WS+IWRC / 8x36WS+IWRC MAIN HOIST ROPES 6X36WS+IWRC / 8x36WS+IWRC N2 HYROPE 35xK7, 40xK7 / 55xK7 / 67xK7 N2 HYROPE 35xK19S / 35xK26WS WHIP HOIST ROPES N2 HYROPE 35xK7 / 40xK7 / 55xK7 / 67xK7 N2 HYROPE 35xK19S / 35xK26WS Average torque factors for the following rope constructions are: 35xK7 and 40xK7 torque factor 0.0080 55xK7 and 67xK7 torque factor 0.0050