Для заказов: тел.8-800-707-06-93 (беспл. по РФ)

beyond anything Single and multiple part reeving Pedestal cranes may come in different ways as to rope reeving lay outs. We are speaking of multiple part reeved ropes and single part reeved main hoist and whip hoist systems. The multiple part systems may allow to be equipped with six or eight strand ropes in right and left lay version in a tandem, whereas single part systems are almost exclusively equipped with multi strand non rotating ropes. Compacted crane ropes By compacting hoist ropes the resistance to crushing improves substantially. Especially on multi layer drums, wire ropes could interlock between the different layers. By compacting a wire rope, one makes the surface of the outer layers (outer wires) of the rope more flat. This flatter surface leaves the rope with less grip to get hold of. Consequently, layers slide more smooth along each other. Besides, compacted ropes perform better on the surface pressure issue and brings consequently a higher resistance to fatigue. Plastic infill In order to improve constructional stability of a rope, the IWRC is extruded with a special plastic medium. When eventually the strands are laid around the IWRC, the plastic finds its final position between strands and IWRC and strands among each other. The plastic infill prevents excessive internal rope wear and prevents dirt and water to penetrate into the rope, at the same time. Crane Ropes Kiswire is the largest wire rope producer in the world. Annually, about 140.000 tons of wire rope is delivered, worldwide. For decades, Kiswire is specializing in the development and production of wire rope. Meanwhile, the company has acquired a reputable and leading position in a great variety of markets, in literally all corners of the world. The offshore industry is one is a main market for Kiswire since 25 years, meanwhile.