Продукция Gunnebo со склада комании MOKOT в РФ
3:13 Lifting Points 3 *Safety factor 4:1 Technical Information Working Load Limits (tonnes) for WLP 1-leg 2-leg 3- and 4-leg Typ WLL tonnes* α 0-90° β 0-45° α 90-120° β 45-60° α 0-90° β 0-45° α 90-120° β 45-60° WLP-2.5T 2.5 3.5 2.5 5.25 3.75 WLP-4T 4.0 5.6 4.0 8.4 6.0 WLP-7T 7.0 9.8 7.0 14.7 10.5 WLP-10T 10.0 14.0 10.0 21.0 15.0 WLP-16T 16.0 22.4 16.0 33.6 24.0 Note! The above loads apply to normal usage and equally loaded legs. For asymmetric loaded chain slings, the following is recommended: • A two-legged system is rated as a single-legged system. • A three- or four-legged system is rated as a two-legged system. 1-leg 2-leg 3- and 4-leg Typ WLL tonnes* α 0-90° β 0-45° α 90-120° β 45-60° α 0-90° β 0-45° α 90-120° β 45-60° SLP-1T 1.0 1.4 1.0 2.1 1.5 SLP-3T 3.0 4.2 3.0 6.3 4.5 SLP-5T 5.0 7.0 5.0 10.5 7.5 1-leg 2-leg 3- and 4-leg Typ WLL tonnes* α 0-90° β 0-45° α 90-120° β 45-60° α 0-90° β 0-45° α 90-120° β 45-60° ELP-16-8 1.0** 1.4 1.0 2.1 1.5 ELP-20-8 1.5** 2.1 1.5 3.2 2.3 ELP-24-8 2.0** 2.8 2.0 4.2 3.0 ELP-30-8 3.0** 4.2 3.0 6.3 4.5 Working Load Limits (tonnes) for SLP Working Load Limits (tonnes) for ELP ** In case of 1-leg application where loading is limited to straight loading in the direction of thread (no bending force) it is possible to use ELP with four times higher WLL. Note! Threaded depths need to be at least 1xM for steel, 1,25xM for cast iron and 2xM for aluminium alloy.
RkJQdWJsaXNoZXIy NjQzMTQ5