Продукция Gunnebo со склада комании MOKOT в РФ

2:42 Technical Information The following information aims to give advice and explain the most common questions in order to ensure safe and proper use of lifting equipment. It is of the utmost importance that this information is known to the user, and in accordance with the Machinery Directive 2006/42/EC this information must be delivered to the customer. Extreme Environments The in-service temperature effects the WLL as follows: Upon return to normal temperature, the sling reverts to its full capacity within the above temperature range. Chain slings should not be used above or below these temperatures. Note! A chain sling with Grade 10 (200) chain must not be used in temperatures above 200 °C. • Chain and components must not be used in alkaline (>pH10) or acidic conditions (<pH6). • Comprehensive and regular examination must be carried out when used in severe or corrosive inducing environments. • In uncertain situations consult your Gunnebo Industries dealer. Surface Treatment Note! Hot-dip galvanizing or plating is not allowed outside the control of the manufacturer. Temperature (°C) Reduction of WLL Grade 10 chain (400) Grade 10 chain (200) Grade 10 components Grade 8 chain & components -40 to +200 °C 0 % 0 % 0 % 0 % +200 to +300 °C 10 % Not allowed 10 % 10 % +300 to +400 °C 25 % Not allowed 25 % 25 % Protect Yourself and Others • Before each use the chain sling should be checked for obvious damage or deterioration. • Know the weight of the load, the centre of gravity and ensure it is ready to move and no obstacles will obstruct the lift. • Check the conformity of the load with the WLL of the ID tag for the specific working configuration. Never use a sling without a legible valid ID tag! • Prepare the landing site. • Never overload a sling and avoid shock loading. • Never use an improper sling configuration. • Never use a worn out or damaged sling. • Never ride on the load. • Never walk or stand under a suspended load. • Take into consideration that the load may swing or rotate. • Watch your feet and fingers while loading/unloading. • Always ensure that your back is clear. General Advice • Ensure that the sling is precisely as ordered. • Ensure that the manufacturers certificate is in order. • Ensure that the ID-tag corresponds to the information on the certificate (the following ID tag information is compulsory: WLL, number of chain legs, nominal size (mm) individual ID-mark, manufacturer, CE-marking and year of manufacturing). • Ensure that all details of the chain sling are recorded. • Ensure that the staff using the chain sling has received the appropriate information and training. Asymmetrical Loading Conditions For unequally loaded chain legs we recommend that the WLL are determined as follows: • 2-leg slings calculated as the corresponding 1-leg sling • 3 and 4-leg slings calculated as the corresponding 1-leg sling. (If it is certain that 2-legs are equally carrying the major part of the load, it can be calculated as the corresponding 2-leg sling.