Продукция Gunnebo со склада комании MOKOT в РФ

2 2:17 All dimensions in mm *Safety factor 4:1 Art. no. Code WLL tonnes* A L B E F G H Weight kgs Z101154 BKD-13-10 6.8 20 207 44 44 16 30 40 3.2 Z101155 BKD-16-10 10.3 26 254 48 56 20 37 50 5.8 Z101156 BKD-18/20-10 16.0 30 289 57 60 22 44 62 9.1 Z101373 BKD-26-10 OS 27.3 35 342 72 80 25 54 68 16.8 Safety Hook BKD The double latch BK-hook with recessed trigger. Should the hook latch accidentally open, either through direct impact or excessive wear on the trigger, the extra latch is there to retain the load safely. The latch does not cause inconvenience for the operator and may save their lives if something goes wrong. Safety Hook BK The "original" safety hook with eye connector. A E F B H G L Art. no. Code WLL tonnes* A L B E F G H Weight kgs Z101108 BK-6-10 1.5 12 109 29 22 10 15 21 0.5 Z101097 BK-7/8-10 2.6 14 138 37 28 11 17 26 0.9 Z101024 BK-10-10 4.0 16 168 45 34 13 21 31 1.5 Z101032 BK-13-10 6.8 20 207 55 44 16 30 40 3.0 Z101040 BK-16-10 10.3 26 254 62 56 20 37 50 5.5 Z101089 BK-18/20-10 16.0 30 289 68 60 22 44 64 9.0 Z101325 BK-22-10 20.0 32 320 80 70 24 50 64 11.3 Z101326 BK-26-10 27.3 35 342 100 80 25 54 68 16.5 Shank Safety Hook BKT Safety hook with shank ready for customized machines. Art. no. Code WLL tonnes* L B L1 D dmin G H Weight kgs Z1011120 BKT-6-10 1.5 90 29 36 20 11 15 21 0.5 Z1011020 BKT-7/8-10 2.6 111 37 47 24 13 17 26 0.9 Z1010690 BKT-10-10 4.0 133 45 51 29 16 21 31 1.6 Z1010710 BKT-13-10 6.8 160 55 77 34 20 30 39 3.0 H G L1 L B D d min = the smallest permitted shank dimension after machining. Note! After machining of the shank, proof loading must be carried out. For larger sizes, see Classic Grade 8. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M and AS 3776:2015. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M and AS 3776:2015. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M and AS 3776:2015.